Step 3 · Measure and Cut Carpet Treads
Measure the width of each stair tread from wall to wall. Then, measure the depth of the tread from the nosing to the riser. If you are wrapping the carpet over the nosing and down the riser slightly, add the desired overlap length (typically 1-2 inches) to the tread depth measurement. It is often best to cut a paper template for the first tread, then use that to trace onto the carpet. For subsequent treads, measure each individually as stair dimensions can vary. Use a sharp utility knife or carpet shears to cut the carpet precisely according to your measurements. Cut a straight line for the back edge and the sides. For the nosing, ensure a clean cut that will allow for a neat wrap.