Step 2 · Clean and Repair Stair Surfaces
Once the old covering is removed, inspect the stair treads for any damage. Sweep or vacuum away any remaining dust or debris. Use sandpaper (around 120-grit) to smooth out any rough areas, splinters, or uneven patches on the wood. Pay special attention to the edges and the nosing of each tread. For any significant gouges, holes, or cracks, apply wood filler according to the manufacturer's instructions. Allow the wood filler to dry completely, then sand it smooth so it is flush with the surrounding wood surface. Wipe down each tread with a damp cloth to remove all sanding dust, and allow it to dry thoroughly before proceeding.