Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Connect Wiring to Fixtures

At each installed fixture, use the wire strippers to expose about 1/2 inch of the conductor on both the wire coming from the power source and the wire leads on the fixture. Connect the corresponding wires (usually positive to positive, negative to negative, or follow manufacturer's color-coding) using the provided waterproof wire connectors. Ensure the connections are tight and that the connectors completely seal the exposed wire. For some fixtures, this may involve pushing stripped wire ends into specialized terminals or using wire nuts with silicone sealant.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Connect Wiring to Fixtures

At each installed fixture, use the wire strippers to expose about 1/2 inch of the conductor on both the wire coming from the power source and the wire leads on the fixture. Connect the corresponding wires (usually positive to positive, negative to negative, or follow manufacturer's color-coding) using the provided waterproof wire connectors. Ensure the connections are tight and that the connectors completely seal the exposed wire. For some fixtures, this may involve pushing stripped wire ends into specialized terminals or using wire nuts with silicone sealant.

Videos for this step

Make Wire ConnectionsConnect Wires with Waterproof ConnectorsConnect Wires with Waterproof Wire Nuts

Tools and Materials

← Project

How to Install Low-Voltage Deck Stair Lights

Step 5 of 8·2.5 hr left

Plan Light Placement and Wire Runs
60 minutes3 items
Drill Pilot Holes for Fixtures
30 minutes3 items
Run Low-Voltage Wiring
90 minutes5 items
Install Light Fixtures
45 minutes4 items
5
Connect Wiring to Fixtures
60 minutes4 items
6
Connect to Low-Voltage Transformer
45 minutes6 items
7
Test the Lighting System
15 minutes1 items
8
Secure and Conceal Wiring
30 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.