Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Install Light Fixtures

Take each light fixture and align it with the pilot holes drilled in Step 2. Secure the fixture using the provided mounting screws. Hand-tighten the screws initially, then use a screwdriver to snug them up, being careful not to overtighten, which could strip the holes or crack the fixture housing. Ensure each fixture is firmly attached and properly oriented.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Install Light Fixtures

Take each light fixture and align it with the pilot holes drilled in Step 2. Secure the fixture using the provided mounting screws. Hand-tighten the screws initially, then use a screwdriver to snug them up, being careful not to overtighten, which could strip the holes or crack the fixture housing. Ensure each fixture is firmly attached and properly oriented.

Videos for this step

Mount New Light FixtureSecure the Light Fixture

Tools and Materials

← Project

How to Install Low-Voltage Deck Stair Lights

Step 4 of 8·3.3 hr left

Plan Light Placement and Wire Runs
60 minutes3 items
Drill Pilot Holes for Fixtures
30 minutes3 items
Run Low-Voltage Wiring
90 minutes5 items
4
Install Light Fixtures
45 minutes4 items
5
Connect Wiring to Fixtures
60 minutes4 items
6
Connect to Low-Voltage Transformer
45 minutes6 items
7
Test the Lighting System
15 minutes1 items
8
Secure and Conceal Wiring
30 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.