Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Apply Adhesive (if necessary)

Check the manufacturer's instructions for your carpet treads. If they do not have a peel-and-stick backing, you will need to apply an appropriate adhesive. Common options include heavy-duty spray adhesive, carpet seam tape, or a high-strength construction adhesive. Apply the adhesive evenly to either the back of the carpet tread or the surface of the step, following the adhesive manufacturer's recommendations for application and drying time (tack time).

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Apply Adhesive (if necessary)

Check the manufacturer's instructions for your carpet treads. If they do not have a peel-and-stick backing, you will need to apply an appropriate adhesive. Common options include heavy-duty spray adhesive, carpet seam tape, or a high-strength construction adhesive. Apply the adhesive evenly to either the back of the carpet tread or the surface of the step, following the adhesive manufacturer's recommendations for application and drying time (tack time).

Videos for this step

Apply Adhesive to TreadsApply Spray AdhesiveApply Carpet Adhesive to Stairs

Tools and Materials

← Project

How to Install Carpet Treads on Garage Steps

Step 3 of 5·2.5 hr left

Clean the Garage Steps
30 minutes3 items
Measure and Cut Carpet Treads
45 minutes4 items
3
Apply Adhesive (if necessary)
20 minutes3 items
4
Install Carpet Treads
60 minutes3 items
5
Allow Adhesive to Cure
72 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.