Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Measure and Cut Carpet Treads

Measure the width and depth of each individual garage step. If the carpet treads come in a standard roll or large sheet, carefully mark the dimensions for each step onto the material. Use a sharp utility knife or heavy-duty scissors to cut out each tread piece. Aim for a snug fit, but allow for a slight overlap onto the riser if desired for a cleaner look and better coverage.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Measure and Cut Carpet Treads

Measure the width and depth of each individual garage step. If the carpet treads come in a standard roll or large sheet, carefully mark the dimensions for each step onto the material. Use a sharp utility knife or heavy-duty scissors to cut out each tread piece. Aim for a snug fit, but allow for a slight overlap onto the riser if desired for a cleaner look and better coverage.

Videos for this step

Measure and Cut Carpet TreadMeasure and Cut CarpetCut and Size Carpet Treads

Tools and Materials

← Project

How to Install Carpet Treads on Garage Steps

Step 2 of 5·3.3 hr left

Clean the Garage Steps
30 minutes3 items
2
Measure and Cut Carpet Treads
45 minutes4 items
3
Apply Adhesive (if necessary)
20 minutes3 items
4
Install Carpet Treads
60 minutes3 items
5
Allow Adhesive to Cure
72 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.