Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Thoroughly Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Slowly turn the water supply back on. Meticulously check all connections for any signs of leaks – drips, moisture, or unusual sounds. Address and repair any leaks immediately. A pressure test may be necessary depending on your plumbing system.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Thoroughly Test for Leaks

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Slowly turn the water supply back on. Meticulously check all connections for any signs of leaks – drips, moisture, or unusual sounds. Address and repair any leaks immediately. A pressure test may be necessary depending on your plumbing system.

Videos for this step

Check for LeaksPerform Final Leak CheckTest for Leaks

← Project

How to Rough-In a Shower Valve: A Step-by-Step DIY Guide

Step 4 of 4·30 min left

Shut Off the Water Supply
15 minsBeginner
Install Blocking and Mark Valve Position
1 min5 itemsIntermediate
Connect Water Supply Lines
1 min5 items
4
Thoroughly Test for Leaks
30 minsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.