Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Connect Water Supply Lines

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Carefully cut and install the hot and cold water supply lines, along with the shower head outlet pipe, connecting them to the marked positions. Use the appropriate fittings for your plumbing material (e.g., solder for copper, connectors for PEX or CPVC). Ensure all connections are secure and properly aligned.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Connect Water Supply Lines

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Carefully cut and install the hot and cold water supply lines, along with the shower head outlet pipe, connecting them to the marked positions. Use the appropriate fittings for your plumbing material (e.g., solder for copper, connectors for PEX or CPVC). Ensure all connections are secure and properly aligned.

Videos for this step

Tie into Main Water SupplySoldering Copper PipesRemove Old Valve and Install New Valve Body

Tools and Materials

← Project

How to Rough-In a Shower Valve: A Step-by-Step DIY Guide

Step 3 of 4·31 min left

Shut Off the Water Supply
15 minsBeginner
Install Blocking and Mark Valve Position
1 min5 itemsIntermediate
3
Connect Water Supply Lines
1 min5 items
4
Thoroughly Test for Leaks
30 minsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.