Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Install Blocking and Mark Valve Position

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Precisely locate the wall studs where the valve will be mounted. Using the manufacturer's instructions, measure and mark the positions for the hot and cold water supply lines and shower head outlet. Install sturdy blocking between the studs to provide robust support for the valve, securing it with screws. Account for the finished wall thickness (tile, drywall, etc.).

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Install Blocking and Mark Valve Position

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Precisely locate the wall studs where the valve will be mounted. Using the manufacturer's instructions, measure and mark the positions for the hot and cold water supply lines and shower head outlet. Install sturdy blocking between the studs to provide robust support for the valve, securing it with screws. Account for the finished wall thickness (tile, drywall, etc.).

Videos for this step

Install Wooden Blocking for ValveValve Mounting and Rough-inInstall Wood Blocking

Tools and Materials

← Project

How to Rough-In a Shower Valve: A Step-by-Step DIY Guide

Step 2 of 4·32 min left

Shut Off the Water Supply
15 minsBeginner
2
Install Blocking and Mark Valve Position
1 min5 itemsIntermediate
3
Connect Water Supply Lines
1 min5 items
4
Thoroughly Test for Leaks
30 minsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.