Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 10 · Drywall Repair and Finishing

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Once you are completely confident that the system is leak-free and has passed any required inspections, you can begin the final phase of the project. If you removed any insulation, replace it now. Re-install the pieces of drywall you carefully cut out earlier, securing them to the studs with drywall screws. Apply drywall tape over all the seams. Using a taping knife, apply several thin coats of joint compound over the tape, feathering the edges to blend with the existing wall. Allow each coat to dry completely and sand it smooth before applying the next. Once the final coat is sanded and smooth, apply a coat of primer, followed by a top coat of paint that matches the rest of the wall.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 10 · Drywall Repair and Finishing

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Once you are completely confident that the system is leak-free and has passed any required inspections, you can begin the final phase of the project. If you removed any insulation, replace it now. Re-install the pieces of drywall you carefully cut out earlier, securing them to the studs with drywall screws. Apply drywall tape over all the seams. Using a taping knife, apply several thin coats of joint compound over the tape, feathering the edges to blend with the existing wall. Allow each coat to dry completely and sand it smooth before applying the next. Once the final coat is sanded and smooth, apply a coat of primer, followed by a top coat of paint that matches the rest of the wall.

Videos for this step

Finishing, Painting, and CleanupPatch the DrywallTexture and Paint

Tools and Materials

← Project

How to Replace Grey Polybutylene Pipe with PEX

Step 10 of 10·8 min left

Planning and Permitting
4 mins8 itemsAdvanced
Shut Off Water and Drain System
30 mins1 itemsBeginner
Accessing the Pipes
2 mins4 itemsAdvanced
Removing Old Polybutylene Pipes
3 mins5 itemsAdvanced
Installing the PEX Manifold
1 min5 itemsIntermediate
Running New PEX Lines
6 mins9 items
Making Crimp Connections
4 mins6 items
Tying into the Main Supply
1 min7 items
Testing the System
4 mins3 itemsAdvanced
10
Drywall Repair and Finishing
8 mins9 itemsAdvanced
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.