Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Disconnect the Old Assembly from Behind the Tub

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Locate and open the plumbing access panel, which is typically on the wall behind the faucet end of the tub. Using a flashlight, identify the waste and overflow assembly. It consists of the vertical overflow tube connected to the overflow opening and the drain shoe connected to the tub drain, which join at a sanitary tee. Use channel-lock pliers to loosen the two large slip nuts: one connecting the overflow tube to the tee, and one connecting the drain shoe to the tee. You may need a bucket to catch a small amount of residual water.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Disconnect the Old Assembly from Behind the Tub

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Locate and open the plumbing access panel, which is typically on the wall behind the faucet end of the tub. Using a flashlight, identify the waste and overflow assembly. It consists of the vertical overflow tube connected to the overflow opening and the drain shoe connected to the tub drain, which join at a sanitary tee. Use channel-lock pliers to loosen the two large slip nuts: one connecting the overflow tube to the tee, and one connecting the drain shoe to the tee. You may need a bucket to catch a small amount of residual water.

Videos for this step

Shut Off Water and Remove Old FaucetDisconnect Old FaucetDisconnect and Remove Old Faucet

Tools and Materials

← Project

How to Replace a Pop-up Bathtub Drain and Overflow Assembly

Step 3 of 8·1.8 hr left

Remove the Overflow Plate and Linkage
10 mins2 itemsBeginner
Remove the Drain Flange
20 mins2 items
3
Disconnect the Old Assembly from Behind the Tub
15 mins3 itemsAdvanced
4
Remove Old Assembly and Dry-Fit the New One
25 mins3 itemsAdvanced
5
Install the New Drain Flange and Shoe
20 mins4 itemsAdvanced
6
Install Overflow Pipe and Connect to Main Drain
20 mins3 itemsIntermediate
7
Install and Adjust New Stopper and Linkage
15 mins1 itemsIntermediate
8
Test for Leaks
15 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.