Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Remove the Overflow Plate and Linkage

Begin by removing the two screws holding the overflow plate to the tub wall. Once the screws are out, gently pull the plate away from the tub. The trip-lever and the connected linkage assembly will come out with it. Carefully pull the entire linkage mechanism up and out of the overflow pipe. Place the old plate, screws, and linkage aside.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Remove the Overflow Plate and Linkage

Begin by removing the two screws holding the overflow plate to the tub wall. Once the screws are out, gently pull the plate away from the tub. The trip-lever and the connected linkage assembly will come out with it. Carefully pull the entire linkage mechanism up and out of the overflow pipe. Place the old plate, screws, and linkage aside.

Videos for this step

Unpack and Inspect New PartsReinstall AssemblyReassemble the Overflow Mechanism

Tools and Materials

← Project

How to Replace a Pop-up Bathtub Drain and Overflow Assembly

Step 1 of 8·2.3 hr left

1
Remove the Overflow Plate and Linkage
10 mins2 itemsBeginner
2
Remove the Drain Flange
20 mins2 items
3
Disconnect the Old Assembly from Behind the Tub
15 mins3 itemsAdvanced
4
Remove Old Assembly and Dry-Fit the New One
25 mins3 itemsAdvanced
5
Install the New Drain Flange and Shoe
20 mins4 itemsAdvanced
6
Install Overflow Pipe and Connect to Main Drain
20 mins3 itemsIntermediate
7
Install and Adjust New Stopper and Linkage
15 mins1 itemsIntermediate
8
Test for Leaks
15 mins2 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.