Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Extract the Old Cartridge

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

This step varies by brand. Before removing, note the orientation of the old cartridge. For a Moen Posi-Temp valve, you will see a small, U-shaped retaining clip at the top of the valve body. Use needle-nose pliers or a flathead screwdriver to pull this clip straight up and out. For a Delta Monitor valve, there is no clip. Instead, you'll see a large brass or plastic bonnet nut threaded over the cartridge. Use channel-lock pliers to unscrew this nut counter-clockwise. Wrap a rag around the nut to prevent scratching the finish. Once the retaining clip or bonnet nut is removed, the cartridge can be extracted. It may pull out easily, but if it is stuck, use pliers to grip the stem and twist back and forth while pulling. If it's very stuck, use a dedicated cartridge puller tool as instructed by the tool's manufacturer.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Extract the Old Cartridge

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

This step varies by brand. Before removing, note the orientation of the old cartridge. For a Moen Posi-Temp valve, you will see a small, U-shaped retaining clip at the top of the valve body. Use needle-nose pliers or a flathead screwdriver to pull this clip straight up and out. For a Delta Monitor valve, there is no clip. Instead, you'll see a large brass or plastic bonnet nut threaded over the cartridge. Use channel-lock pliers to unscrew this nut counter-clockwise. Wrap a rag around the nut to prevent scratching the finish. Once the retaining clip or bonnet nut is removed, the cartridge can be extracted. It may pull out easily, but if it is stuck, use pliers to grip the stem and twist back and forth while pulling. If it's very stuck, use a dedicated cartridge puller tool as instructed by the tool's manufacturer.

Videos for this step

Remove Retaining Clip and Old CartridgeLoosen a Stuck CartridgeRemove Old Cartridge

Tools and Materials

← Project

How to Replace a Leaky Shower Cartridge (Delta Monitor & Moen Models)

Step 4 of 6·35 min left

Gather Tools and Supplies
5 mins7 itemsBeginner
Shut Off Water Supply and Relieve Pressure
10 mins1 itemsIntermediate
Remove Faucet Handle and Trim Plate
10 mins3 itemsIntermediate
4
Extract the Old Cartridge
15 mins3 itemsAdvanced
5
Clean Valve and Install New Cartridge
10 mins4 itemsIntermediate
6
Reassemble and Test for Leaks
10 mins5 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.