Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Disconnect the Old Sillcock (Sweat Joint)

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Drape a fire-resistant cloth over any wood joists or other flammable materials directly behind the solder joint. Put on safety glasses and heat-resistant gloves. Using a propane torch, apply heat evenly to the fitting where the sillcock connects to the copper pipe. Do not heat the pipe itself. Once the solder begins to look wet and shiny, use a pair of channel-lock pliers to grip the sillcock's pipe and gently twist and pull it off the copper water line.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Disconnect the Old Sillcock (Sweat Joint)

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Drape a fire-resistant cloth over any wood joists or other flammable materials directly behind the solder joint. Put on safety glasses and heat-resistant gloves. Using a propane torch, apply heat evenly to the fitting where the sillcock connects to the copper pipe. Do not heat the pipe itself. Once the solder begins to look wet and shiny, use a pair of channel-lock pliers to grip the sillcock's pipe and gently twist and pull it off the copper water line.

Videos for this step

Solder the ConnectionSolder New Valve AssemblyHeat the Fitting

Tools and Materials

← Project

How to Replace a Frost-Free Outdoor Spigot (Sillcock)

Step 4 of 11·1.3 hr left

Shut Off Water Supply and Drain System
10 mins1 itemsBeginner
Access the Interior Connection
15 mins3 itemsIntermediate
Measure and Purchase Replacement
5 mins2 itemsBeginner
4
Disconnect the Old Sillcock (Sweat Joint)
15 mins5 items
5
Remove Old Sillcock from Exterior
5 mins1 itemsBeginner
6
Prepare Copper Pipe and New Fitting
10 mins4 itemsIntermediate
7
Install New Sillcock and Apply Flux
10 mins3 itemsIntermediate
8
Solder the New Connection
15 mins6 items
9
Secure Sillcock to Exterior Wall
5 mins2 itemsBeginner
10
Seal the Exterior Penetration
5 mins2 itemsBeginner
11
Restore Water and Check for Leaks
10 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.