Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Mark the Cut Lines

Identify the cracked section of the pipe. Using a tape measure and a permanent marker or grease pencil, mark two cut lines on the pipe. These lines should be on either side of the crack, ensuring the entire damaged area is removed. Leave at least 2 inches of straight, undamaged pipe beyond the crack on both sides to provide a good surface for the new couplings.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Mark the Cut Lines

Identify the cracked section of the pipe. Using a tape measure and a permanent marker or grease pencil, mark two cut lines on the pipe. These lines should be on either side of the crack, ensuring the entire damaged area is removed. Leave at least 2 inches of straight, undamaged pipe beyond the crack on both sides to provide a good surface for the new couplings.

Videos for this step

Cut Out the Damaged Pipe SectionCut Out the Damaged Pipe SectionCut Out the Damaged Section

Tools and Materials

← Project

How to Replace a Cracked Cast Iron Drain Pipe with PVC

Step 3 of 11·3.3 hr left

Preparation and Safety
20 mins4 itemsBeginner
Support the Existing Pipe
30 mins5 itemsIntermediate
3
Mark the Cut Lines
10 mins2 itemsBeginner
4
Cut the Cast Iron Pipe
60 mins6 items
5
Remove the Damaged Section
15 mins3 itemsAdvanced
6
Clean and Prepare Pipe Ends
20 mins6 itemsIntermediate
7
Measure and Cut the PVC Pipe
15 mins5 itemsIntermediate
8
Assemble the New PVC Section (If Needed)
15 mins4 itemsIntermediate
9
Install the Replacement Section
30 mins5 itemsAdvanced
10
Test the Repair
15 mins3 itemsBeginner
11
Clean Up
20 mins3 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.