Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Secure Valve and Test for Leaks

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Before closing the wall, the valve must be secured. Install a 2x4 wood brace (stringer) horizontally between the wall studs, positioning it so you can anchor the valve body to it. Use a level and tape measure to ensure the valve is plumb and set at the correct depth from the finished wall surface (check manufacturer specs for this dimension). Secure the valve to the brace with screws. Once the solder has cooled completely, reinstall the valve cartridges. Go to the main water supply and turn it back on VERY SLOWLY. Return to the shower and meticulously inspect every solder joint for any sign of a leak or drip. Use a dry paper towel to wipe each joint, as this will reveal even the tiniest amount of moisture.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Secure Valve and Test for Leaks

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Before closing the wall, the valve must be secured. Install a 2x4 wood brace (stringer) horizontally between the wall studs, positioning it so you can anchor the valve body to it. Use a level and tape measure to ensure the valve is plumb and set at the correct depth from the finished wall surface (check manufacturer specs for this dimension). Secure the valve to the brace with screws. Once the solder has cooled completely, reinstall the valve cartridges. Go to the main water supply and turn it back on VERY SLOWLY. Return to the shower and meticulously inspect every solder joint for any sign of a leak or drip. Use a dry paper towel to wipe each joint, as this will reveal even the tiniest amount of moisture.

Videos for this step

Pressure Test SystemMount the Shower ValveTest the Repair

Tools and Materials

← Project

How to Install a Two-Handle Shower Valve

Step 6 of 7·1.3 hr left

Preparation and Safety
30 mins3 itemsBeginner
Gain Access to the Valve
45 mins10 items
Remove Old Shower Valve
30 mins3 itemsAdvanced
Prepare Pipes for Installation
20 mins3 itemsIntermediate
Assemble and Solder New Valve
60 mins12 items
6
Secure Valve and Test for Leaks
30 mins6 itemsAdvanced
7
Install Trim and Handles
45 mins5 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.