Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Prepare Pipes for Installation

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Proper pipe preparation is essential for a leak-free solder joint. Take a deburring tool and insert it into the end of each cut pipe, rotating it to remove the sharp inner burr created by the cutter. Then, use sand cloth or an emery cloth to thoroughly clean and polish the outside of the pipe ends (about 1 inch back from the end) and the inside of the new copper fittings until the copper is bright and shiny. This removes any oxidation and surface contaminants that could prevent the solder from flowing properly.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Prepare Pipes for Installation

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Proper pipe preparation is essential for a leak-free solder joint. Take a deburring tool and insert it into the end of each cut pipe, rotating it to remove the sharp inner burr created by the cutter. Then, use sand cloth or an emery cloth to thoroughly clean and polish the outside of the pipe ends (about 1 inch back from the end) and the inside of the new copper fittings until the copper is bright and shiny. This removes any oxidation and surface contaminants that could prevent the solder from flowing properly.

Videos for this step

Clean and Prepare Pipe for CappingClean and Deburr Copper PipeClean and Deburr Copper Pipe

Tools and Materials

← Project

How to Install a Two-Handle Shower Valve

Step 4 of 7·2.6 hr left

Preparation and Safety
30 mins3 itemsBeginner
Gain Access to the Valve
45 mins10 items
Remove Old Shower Valve
30 mins3 itemsAdvanced
4
Prepare Pipes for Installation
20 mins3 itemsIntermediate
5
Assemble and Solder New Valve
60 mins12 items
6
Secure Valve and Test for Leaks
30 mins6 itemsAdvanced
7
Install Trim and Handles
45 mins5 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.