Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Turn Water On and Test for Leaks

Go back to the main water shut-off valve and turn it on slowly (counter-clockwise). Return to the shower. With the handle in the off position, visually inspect for any drips around the handle, bonnet nut area, or escutcheon. Listen carefully for any hissing sounds. If all is dry, turn the shower on. Test both the hot and cold water functions, rotating the handle through its full range of motion. Check for leaks again while the water is running. If you find a leak, turn the water off and re-check that the cartridge is seated properly and the bonnet nut is snug.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Turn Water On and Test for Leaks

Go back to the main water shut-off valve and turn it on slowly (counter-clockwise). Return to the shower. With the handle in the off position, visually inspect for any drips around the handle, bonnet nut area, or escutcheon. Listen carefully for any hissing sounds. If all is dry, turn the shower on. Test both the hot and cold water functions, rotating the handle through its full range of motion. Check for leaks again while the water is running. If you find a leak, turn the water off and re-check that the cartridge is seated properly and the bonnet nut is snug.

Videos for this step

Reassemble and Test FaucetTurn On Water Supply and Check for LeaksRestore Water and Test

← Project

How to Identify and Replace Your Delta Monitor Shower Cartridge (Old vs. New)

Step 7 of 7·5 min left

Shut Off Water Supply
5 minsBeginner
Remove Handle and Trim
10 mins3 itemsIntermediate
Remove the Bonnet Nut
5 mins2 itemsAdvanced
Remove and Identify the Old Cartridge
15 mins2 itemsAdvanced
Prepare and Install New Cartridge
10 mins3 itemsIntermediate
Reassemble the Faucet
10 mins2 itemsIntermediate
7
Turn Water On and Test for Leaks
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.