Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off Water Supply

The first and most critical step is to completely shut off the water to the shower. Locate the main water shut-off valve for your home (often in the basement, a utility closet, or outside near the meter) and turn the handle or knob clockwise until it is fully closed. If your shower has dedicated shut-off valves (sometimes accessible via a panel behind the shower wall), you can use those instead. After turning the valve, go back to the shower and turn the handle on to drain any remaining water and confirm that the supply is off. No water should be flowing.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off Water Supply

The first and most critical step is to completely shut off the water to the shower. Locate the main water shut-off valve for your home (often in the basement, a utility closet, or outside near the meter) and turn the handle or knob clockwise until it is fully closed. If your shower has dedicated shut-off valves (sometimes accessible via a panel behind the shower wall), you can use those instead. After turning the valve, go back to the shower and turn the handle on to drain any remaining water and confirm that the supply is off. No water should be flowing.

Videos for this step

Shut Off Main Water SupplyShut Off Water Supply and Drain LineLocate Water Shut-Off Valve

← Project

How to Identify and Replace Your Delta Monitor Shower Cartridge (Old vs. New)

Step 1 of 7·1 hr left

1
Shut Off Water Supply
5 minsBeginner
2
Remove Handle and Trim
10 mins3 itemsIntermediate
3
Remove the Bonnet Nut
5 mins2 itemsAdvanced
4
Remove and Identify the Old Cartridge
15 mins2 itemsAdvanced
5
Prepare and Install New Cartridge
10 mins3 itemsIntermediate
6
Reassemble the Faucet
10 mins2 itemsIntermediate
7
Turn Water On and Test for Leaks
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.