Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Reassemble the Faucet

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Thread the bonnet nut back onto the valve body by hand until it is snug. Then, use channel lock pliers to tighten it an additional quarter-turn. Do not overtighten, as this can crack the cartridge or the valve body. Slide the trim sleeve back over the valve, reinstall the escutcheon plate with its two screws, and reattach the handle. Tighten the set screw on the handle with your Allen wrench or screwdriver until it is secure.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Reassemble the Faucet

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Thread the bonnet nut back onto the valve body by hand until it is snug. Then, use channel lock pliers to tighten it an additional quarter-turn. Do not overtighten, as this can crack the cartridge or the valve body. Slide the trim sleeve back over the valve, reinstall the escutcheon plate with its two screws, and reattach the handle. Tighten the set screw on the handle with your Allen wrench or screwdriver until it is secure.

Videos for this step

Reassemble FaucetReassemble the FaucetReassemble the Faucet

Tools and Materials

← Project

How to Identify and Replace Your Delta Monitor Shower Cartridge (Old vs. New)

Step 6 of 7·15 min left

Shut Off Water Supply
5 minsBeginner
Remove Handle and Trim
10 mins3 itemsIntermediate
Remove the Bonnet Nut
5 mins2 itemsAdvanced
Remove and Identify the Old Cartridge
15 mins2 itemsAdvanced
Prepare and Install New Cartridge
10 mins3 itemsIntermediate
6
Reassemble the Faucet
10 mins2 itemsIntermediate
7
Turn Water On and Test for Leaks
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.