Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Turn Water On and Test for Leaks

With the faucet fully reassembled, you can now test your work. Slowly turn both the hot and cold water shutoff valves counter-clockwise to restore the water supply. Check for any immediate leaks under the sink around the supply lines and valves. Then, turn the faucet handle on and move it around to test both hot and cold water flow. Carefully inspect for leaks around the base of the spout and from under the handle. If everything is dry, the repair is complete.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Turn Water On and Test for Leaks

With the faucet fully reassembled, you can now test your work. Slowly turn both the hot and cold water shutoff valves counter-clockwise to restore the water supply. Check for any immediate leaks under the sink around the supply lines and valves. Then, turn the faucet handle on and move it around to test both hot and cold water flow. Carefully inspect for leaks around the base of the spout and from under the handle. If everything is dry, the repair is complete.

Videos for this step

Restore Water and TestTest the RepairTest for Leaks

Tools and Materials

← Project

How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)

Step 7 of 7·5 min left

Shut Off Water Supply & Prepare Workspace
10 mins2 itemsBeginner
Remove the Faucet Handle
10 mins2 itemsIntermediate
Remove the Cap and Cam Assembly
10 mins1 itemsIntermediate
Replace Ball, Seats, and Springs
15 mins3 itemsAdvanced
Replace Spout O-Rings
15 mins3 itemsAdvanced
Reassemble the Faucet
15 mins6 itemsIntermediate
7
Turn Water On and Test for Leaks
5 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.