Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Remove the Cap and Cam Assembly

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

With the handle removed, you will see a chrome dome-shaped cap. Unscrew this cap by turning it counter-clockwise. It should be hand-tight, but if it's stuck, wrap a rag around it and use adjustable pliers to get a better grip and avoid scratching the finish. Once the cap is off, lift out the plastic cam and the rubber cam seal beneath it. Note their orientation for reassembly.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Remove the Cap and Cam Assembly

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

With the handle removed, you will see a chrome dome-shaped cap. Unscrew this cap by turning it counter-clockwise. It should be hand-tight, but if it's stuck, wrap a rag around it and use adjustable pliers to get a better grip and avoid scratching the finish. Once the cap is off, lift out the plastic cam and the rubber cam seal beneath it. Note their orientation for reassembly.

Videos for this step

Pry Off Handle CapsUnscrew and Remove the Valve CapRemove Float and Valve Cap

Tools and Materials

← Project

How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)

Step 3 of 7·1 hr left

Shut Off Water Supply & Prepare Workspace
10 mins2 itemsBeginner
Remove the Faucet Handle
10 mins2 itemsIntermediate
3
Remove the Cap and Cam Assembly
10 mins1 itemsIntermediate
4
Replace Ball, Seats, and Springs
15 mins3 itemsAdvanced
5
Replace Spout O-Rings
15 mins3 itemsAdvanced
6
Reassemble the Faucet
15 mins6 itemsIntermediate
7
Turn Water On and Test for Leaks
5 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.