Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off Water Supply & Prepare Workspace

Before any disassembly, locate the hot and cold water shutoff valves under the kitchen sink. Turn the handles clockwise until they are fully closed. Then, go back to the faucet and move the handle to the 'on' position in the middle to release any remaining water and pressure in the lines. Place an old towel in the sink basin to catch any water drips and to protect the sink surface. Gather all your tools and the new faucet repair kit.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off Water Supply & Prepare Workspace

Before any disassembly, locate the hot and cold water shutoff valves under the kitchen sink. Turn the handles clockwise until they are fully closed. Then, go back to the faucet and move the handle to the 'on' position in the middle to release any remaining water and pressure in the lines. Place an old towel in the sink basin to catch any water drips and to protect the sink surface. Gather all your tools and the new faucet repair kit.

Videos for this step

Plumbing PreparationPrepare Work Area and Shut Off WaterShut Off Water and Disconnect Supply Lines

Tools and Materials

← Project

How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)

Step 1 of 7·1.3 hr left

1
Shut Off Water Supply & Prepare Workspace
10 mins2 itemsBeginner
2
Remove the Faucet Handle
10 mins2 itemsIntermediate
3
Remove the Cap and Cam Assembly
10 mins1 itemsIntermediate
4
Replace Ball, Seats, and Springs
15 mins3 itemsAdvanced
5
Replace Spout O-Rings
15 mins3 itemsAdvanced
6
Reassemble the Faucet
15 mins6 itemsIntermediate
7
Turn Water On and Test for Leaks
5 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.