Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Check Air Filter and Indoor Unit

Open the access panel to the indoor air handler (usually located near the furnace or air conditioner). Locate and remove the existing air filter. Examine it for dirt and debris. If it appears clogged, replace it with a new filter of the correct size and MERV rating. Inspect the area around the air handler, including the drain pan, for any signs of water leaks or microbial growth.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Check Air Filter and Indoor Unit

Open the access panel to the indoor air handler (usually located near the furnace or air conditioner). Locate and remove the existing air filter. Examine it for dirt and debris. If it appears clogged, replace it with a new filter of the correct size and MERV rating. Inspect the area around the air handler, including the drain pan, for any signs of water leaks or microbial growth.

Videos for this step

Replace Indoor Air FilterInspect and Remove Air FilterInspect Indoor Air Handler and Filter

Tools and Materials

← Project

Heat Pump Repair

Step 3 of 10·2.5 hr left

Safety First: Disconnect Power
15 minutes2 items
Inspect Outdoor Unit for Visible Damage
20 minutes3 items
3
Check Air Filter and Indoor Unit
15 minutes3 items
4
Listen for Unusual Noises
10 minutes2 items
5
Check Refrigerant Lines for Ice Buildup
10 minutes2 items
6
Verify Thermostat Settings
5 minutes1 items
7
Inspect Condensate Drain Line for Clogs
30 minutes4 items
8
Check Electrical Connections (Advanced)
45 minutes4 items
9
Test Capacitors (Advanced)
30 minutes3 items
10
When to Call a Professional
5 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.