Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 10 · When to Call a Professional

If any of the following conditions are met, cease further DIY attempts and contact a licensed HVAC professional: persistent unusual noises, significant ice buildup that returns after thawing, no power to the unit despite breaker being on, refrigerant leaks (indicated by oily residue on lines or hissing sounds), compressor not running, or any diagnosed electrical component failure you are not qualified to replace.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 10 · When to Call a Professional

If any of the following conditions are met, cease further DIY attempts and contact a licensed HVAC professional: persistent unusual noises, significant ice buildup that returns after thawing, no power to the unit despite breaker being on, refrigerant leaks (indicated by oily residue on lines or hissing sounds), compressor not running, or any diagnosed electrical component failure you are not qualified to replace.

Videos for this step

Observe Outdoor Condensing Unit OperationDiagnose Underlying Cause

Tools and Materials

← Project

Heat Pump Repair

Step 10 of 10·5 min left

Safety First: Disconnect Power
15 minutes2 items
Inspect Outdoor Unit for Visible Damage
20 minutes3 items
Check Air Filter and Indoor Unit
15 minutes3 items
Listen for Unusual Noises
10 minutes2 items
Check Refrigerant Lines for Ice Buildup
10 minutes2 items
Verify Thermostat Settings
5 minutes1 items
Inspect Condensate Drain Line for Clogs
30 minutes4 items
Check Electrical Connections (Advanced)
45 minutes4 items
Test Capacitors (Advanced)
30 minutes3 items
10
When to Call a Professional
5 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.