Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Allow Compound to Dry and Sand Again

Allow the second coat of joint compound to dry thoroughly. Once dry, sand the area lightly with fine-grit sandpaper or a sanding sponge until it is smooth and flush with the surrounding wall. Wipe away all dust.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Allow Compound to Dry and Sand Again

Allow the second coat of joint compound to dry thoroughly. Once dry, sand the area lightly with fine-grit sandpaper or a sanding sponge until it is smooth and flush with the surrounding wall. Wipe away all dust.

Videos for this step

Sand the Second CoatSand and Clean Second Coat of Joint CompoundSand the Surface

Tools and Materials

← Project

Drywall Repair

Step 7 of 9·4.5 hr left

Clean the Damaged Area
5 minutes2 items
Apply Drywall Patch or Tape
10 minutes3 items
Apply First Coat of Joint Compound
15 minutes2 items
Allow Compound to Dry
240 minutes
Sand the Dried Compound
10 minutes3 items
Apply Second Coat of Joint Compound
15 minutes2 items
7
Allow Compound to Dry and Sand Again
240 minutes3 items
8
Prime the Repaired Area
10 minutes2 items
9
Paint the Repaired Area
20 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.