Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Apply First Coat of Joint Compound

Using a putty knife or drywall knife, apply a thin, even layer of joint compound over the self-adhesive patch or mesh tape. Extend the compound slightly beyond the edges of the patch or tape, feathering the edges to blend with the surrounding wall. Ensure the compound is spread thinly to avoid creating a bulge.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Apply First Coat of Joint Compound

Using a putty knife or drywall knife, apply a thin, even layer of joint compound over the self-adhesive patch or mesh tape. Extend the compound slightly beyond the edges of the patch or tape, feathering the edges to blend with the surrounding wall. Ensure the compound is spread thinly to avoid creating a bulge.

Videos for this step

Apply First Coat of Joint CompoundApply Joint CompoundFirst Coat Application

Tools and Materials

← Project

Drywall Repair

Step 3 of 9·9.2 hr left

Clean the Damaged Area
5 minutes2 items
Apply Drywall Patch or Tape
10 minutes3 items
3
Apply First Coat of Joint Compound
15 minutes2 items
4
Allow Compound to Dry
240 minutes
5
Sand the Dried Compound
10 minutes3 items
6
Apply Second Coat of Joint Compound
15 minutes2 items
7
Allow Compound to Dry and Sand Again
240 minutes3 items
8
Prime the Repaired Area
10 minutes2 items
9
Paint the Repaired Area
20 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.