Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Clean the Damaged Area

Using a putty knife or scraper, carefully remove any loose drywall paper, crumbling material, or debris from around the edges of the hole or crack. Wipe the area with a slightly damp cloth to remove dust and ensure a clean surface for patching.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Clean the Damaged Area

Using a putty knife or scraper, carefully remove any loose drywall paper, crumbling material, or debris from around the edges of the hole or crack. Wipe the area with a slightly damp cloth to remove dust and ensure a clean surface for patching.

Videos for this step

Prepare Damaged Drywall SurfacePrep the AreaSurface Preparation

Tools and Materials

← Project

Drywall Repair

Step 1 of 9·9.4 hr left

1
Clean the Damaged Area
5 minutes2 items
2
Apply Drywall Patch or Tape
10 minutes3 items
3
Apply First Coat of Joint Compound
15 minutes2 items
4
Allow Compound to Dry
240 minutes
5
Sand the Dried Compound
10 minutes3 items
6
Apply Second Coat of Joint Compound
15 minutes2 items
7
Allow Compound to Dry and Sand Again
240 minutes3 items
8
Prime the Repaired Area
10 minutes2 items
9
Paint the Repaired Area
20 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.