Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 4 · Disassemble Faucet Handle(s)

Pry off any decorative caps on the faucet handles using a flathead screwdriver or a putty knife. Then, use the appropriate screwdriver (Phillips or flathead) to remove the handle screw. Once the screw is removed, pull the handle straight up or off the faucet stem. You may need to gently rock it back and forth to loosen it.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Disassemble Faucet Handle(s)

Pry off any decorative caps on the faucet handles using a flathead screwdriver or a putty knife. Then, use the appropriate screwdriver (Phillips or flathead) to remove the handle screw. Once the screw is removed, pull the handle straight up or off the faucet stem. You may need to gently rock it back and forth to loosen it.

← Project

Dripping Faucet Repair

Step 4 of 10·1.3 hr left

Turn Off Water Supply
5 minutes
Drain Residual Water
2 minutes
Identify Faucet Type
5 minutes
4
Disassemble Faucet Handle(s)
10 minutes
5
Remove Faucet Components
15 minutes
6
Inspect and Replace Worn Parts
20 minutes
7
Clean Faucet Interior
10 minutes
8
Reassemble Faucet
15 minutes
9
Reattach Faucet Handle(s)
5 minutes
10
Turn On Water Supply and Test
5 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.