Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Inspect Tread Nosing

The nosing is the projecting edge of the tread. Codes often specify that the nosing should not exceed a certain projection (typically 1 to 1.5 inches) and that the radius of the nosing should be consistent. Some codes may require that the bottom of the nosing should not extend beyond the face of the riser below it by more than 1/2 inch to prevent toe-catching.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Inspect Tread Nosing

The nosing is the projecting edge of the tread. Codes often specify that the nosing should not exceed a certain projection (typically 1 to 1.5 inches) and that the radius of the nosing should be consistent. Some codes may require that the bottom of the nosing should not extend beyond the face of the riser below it by more than 1/2 inch to prevent toe-catching.

Videos for this step

Specify Nosing RequirementsAnalyzing Stairway Without Step Nosings (Deck Nosing Present)Analyzing Stairway with Consistent Nosings (Correct Design)

Tools and Materials

← Project

How to Check Your Stairs Against Building Code

Step 5 of 10·1.1 hr left

Measure Stair Rise
15 minutes1 items
Measure Stair Run
15 minutes1 items
Check for Consistent Riser Height
5 minutes
Check for Consistent Tread Depth (Run)
5 minutes
5
Inspect Tread Nosing
10 minutes2 items
6
Check Stair Width
5 minutes1 items
7
Inspect Handrails
15 minutes3 items
8
Inspect Balusters and Guardrails
15 minutes3 items
9
Check Headroom
10 minutes1 items
10
Evaluate Landing Requirements
10 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.