Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 4 · Install Carpet Treads

Starting from the top or bottom of the stairs, carefully align each cut carpet tread with its stair step. Once positioned, press down firmly across the entire surface of the tread, paying special attention to the edges. If using an adhesive, ensure that it makes full contact with both the stair and the tread. Smooth out any wrinkles or bubbles to achieve a seamless appearance and maximum grip.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Install Carpet Treads

Starting from the top or bottom of the stairs, carefully align each cut carpet tread with its stair step. Once positioned, press down firmly across the entire surface of the tread, paying special attention to the edges. If using an adhesive, ensure that it makes full contact with both the stair and the tread. Smooth out any wrinkles or bubbles to achieve a seamless appearance and maximum grip.

← Project

carpet_treads

Step 4 of 5·24.5 hr left

Clean the Carpeted Stairs
30 minutes
Measure and Cut Carpet Treads
45 minutes
Apply Adhesive (If Necessary)
20 minutes
4
Install Carpet Treads
30 minutes
5
Allow Adhesive to Cure
1440 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.