Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 2 · Measure and Cut Carpet Treads

Carefully measure the width and depth of each individual stair tread. Use these measurements to cut your chosen carpet tread material. It is advisable to cut slightly smaller than the exact dimensions of the tread to avoid the edges curling up. If using a roll of material, ensure the cuts are straight and clean. If the carpet treads come in pre-cut pieces, confirm they fit your stairs or if minor adjustments are needed.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Measure and Cut Carpet Treads

Carefully measure the width and depth of each individual stair tread. Use these measurements to cut your chosen carpet tread material. It is advisable to cut slightly smaller than the exact dimensions of the tread to avoid the edges curling up. If using a roll of material, ensure the cuts are straight and clean. If the carpet treads come in pre-cut pieces, confirm they fit your stairs or if minor adjustments are needed.

← Project

carpet_treads

Step 2 of 5·25.6 hr left

Clean the Carpeted Stairs
30 minutes
2
Measure and Cut Carpet Treads
45 minutes
3
Apply Adhesive (If Necessary)
20 minutes
4
Install Carpet Treads
30 minutes
5
Allow Adhesive to Cure
1440 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.