Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 3 · Apply Adhesive (If Necessary)

Depending on the type of carpet treads you are using, an adhesive may be required. If the treads have an integrated adhesive backing, carefully peel off the protective layer. If using a separate adhesive, such as carpet tape or a spray adhesive, apply it evenly to the back of the carpet tread or directly to the stair tread surface. Ensure complete coverage for a secure bond, but avoid excessive application that may seep through the carpet.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Apply Adhesive (If Necessary)

Depending on the type of carpet treads you are using, an adhesive may be required. If the treads have an integrated adhesive backing, carefully peel off the protective layer. If using a separate adhesive, such as carpet tape or a spray adhesive, apply it evenly to the back of the carpet tread or directly to the stair tread surface. Ensure complete coverage for a secure bond, but avoid excessive application that may seep through the carpet.

← Project

carpet_treads

Step 3 of 5·24.8 hr left

Clean the Carpeted Stairs
30 minutes
Measure and Cut Carpet Treads
45 minutes
3
Apply Adhesive (If Necessary)
20 minutes
4
Install Carpet Treads
30 minutes
5
Allow Adhesive to Cure
1440 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.