Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Install Risers (Optional)

Cut riser boards to fit the width of the stairs and the height of each step. Position the riser board flush against the back of the tread above it and the front of the stringer. Secure the riser board by driving screws through it and into the stringer and the back of the tread above. This step is optional but recommended for a more finished look and to prevent items from falling through the stairs.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Install Risers (Optional)

Cut riser boards to fit the width of the stairs and the height of each step. Position the riser board flush against the back of the tread above it and the front of the stringer. Secure the riser board by driving screws through it and into the stringer and the back of the tread above. This step is optional but recommended for a more finished look and to prevent items from falling through the stairs.

Videos for this step

Install RisersInstall RisersInstall Risers

Tools and Materials

← Project

How to Build Stairs for a Shed or Mobile Home

Step 5 of 7·3.8 hr left

Determine Stair Dimensions
60 minutes3 items
Cut Stringers
120 minutes5 items
Attach Stringers to Shed
45 minutes3 items
Install Treads
90 minutes4 items
5
Install Risers (Optional)
60 minutes3 items
6
Attach Stringers to Ground/Landing
45 minutes3 items
7
Install Handrails and Balusters (if required)
120 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.