Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Build and Attach the Backrest (Optional)

If a backrest is desired, construct a frame using 2x4s similar to the base frame, sized to fit the width of the bench and the desired height. Attach this backrest frame to the rear edge of the bench seat and frame using long wood screws or lag bolts. Ensure the backrest is vertical (plumb) and well-supported. You may want to add internal bracing for the backrest, especially if it's tall.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Build and Attach the Backrest (Optional)

If a backrest is desired, construct a frame using 2x4s similar to the base frame, sized to fit the width of the bench and the desired height. Attach this backrest frame to the rear edge of the bench seat and frame using long wood screws or lag bolts. Ensure the backrest is vertical (plumb) and well-supported. You may want to add internal bracing for the backrest, especially if it's tall.

Videos for this step

Construct Angled Backrest SupportsPrepare and Attach BackrestConstruct the Backrest

Tools and Materials

← Project

How to Build a Built-In Bench on a Stair Landing

Step 5 of 9·13 hr left

Measure and Plan Bench Dimensions
60 minutes3 items
Construct the Bench Frame
180 minutes6 items
Secure the Bench Frame to the Landing
60 minutes4 items
Install the Bench Seat
90 minutes5 items
5
Build and Attach the Backrest (Optional)
120 minutes6 items
6
Add Decorative Paneling or Trim
180 minutes9 items
7
Sand and Prepare for Finishing
120 minutes6 items
8
Apply Primer and Paint or Stain
240 minutes6 items
9
Add Cushions or Upholstery (Optional)
120 minutes6 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.