Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Construct the Bench Frame

Based on the planned dimensions, cut 2x4 or 2x6 lumber to create the front, back, and side pieces of the bench frame. Also cut any internal support pieces (joists) needed for rigidity, spaced appropriately (e.g., every 16 or 24 inches). Assemble the frame using wood screws, ensuring all corners are square and the structure is robust. If the bench is long, include additional internal bracing to prevent sagging.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Construct the Bench Frame

Based on the planned dimensions, cut 2x4 or 2x6 lumber to create the front, back, and side pieces of the bench frame. Also cut any internal support pieces (joists) needed for rigidity, spaced appropriately (e.g., every 16 or 24 inches). Assemble the frame using wood screws, ensuring all corners are square and the structure is robust. If the bench is long, include additional internal bracing to prevent sagging.

Videos for this step

Construct the Wooden FrameCut and Assemble Main FrameCut Lumber and Assemble Base Frame

Tools and Materials

← Project

How to Build a Built-In Bench on a Stair Landing

Step 2 of 9·18.5 hr left

Measure and Plan Bench Dimensions
60 minutes3 items
2
Construct the Bench Frame
180 minutes6 items
3
Secure the Bench Frame to the Landing
60 minutes4 items
4
Install the Bench Seat
90 minutes5 items
5
Build and Attach the Backrest (Optional)
120 minutes6 items
6
Add Decorative Paneling or Trim
180 minutes9 items
7
Sand and Prepare for Finishing
120 minutes6 items
8
Apply Primer and Paint or Stain
240 minutes6 items
9
Add Cushions or Upholstery (Optional)
120 minutes6 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.