Skip to main content

Connect Refrigerant Lines, Condensate Drains, and Communication Wires — Install Refrigerant Lines and Condensate Drain

Beginner

Part of project

Professional Installation Recommendation · Step 3 of 5

Helpful?

In this video

Route the pre-flared refrigerant line sets from each indoor unit through the wall penetration to the outdoor condenser unit. Ensure lines are properly insulated. Connect the larger suction line and smaller liquid line to the corresponding ports on both the indoor units and the outdoor unit using two wrenches (one to hold the valve, one to turn the nut) to prevent damage. Connect the condensate drain line from the indoor unit, ensuring it slopes continuously downward to an appropriate discharge point. Install electrical communication wires between the indoor units and the outdoor unit, following the manufacturer's wiring diagram carefully. Use wire strippers and crimpers for secure connections.

1.0K views10
Transcript
Hide

What's going on, ladies and gentlemen? Thank you so much for tuning in. Today, we got a pretty cool HVAC installation for you. Daniel, Derek, and I, we're going to be installing the ACiQ Extreme multiple zone ductless heat pump system. Now, what makes this installation interesting? This outdoor unit has the ability to support up to four indoor ductless

Auto-generated transcript. May contain errors.