Skip to main content

Drain the water heater — Drain the Old Water Heater

Intermediate2 mins

Part of project

Water Heater Installation · Step 2 of 13

Helpful?

In this video

First, locate and turn off the cold water supply valve leading to the water heater. Attach a garden hose to the drain valve at the bottom of the tank and run the other end of the hose to a safe drainage area, such as outside or into a floor drain. To allow air into the tank so it can drain, open a hot water faucet somewhere in the house or flip the lever on the temperature and pressure relief valve (T&P valve) to the open position. Finally, open the drain valve, often using a flathead screwdriver to turn the knob, and let the tank drain completely.

13.3K views27

FAQs

Do I need specialized tools beyond basic plumbing gear for this project, and which ones are essential?

Yes, beyond basic wrenches and screwdrivers, you'll need large pipe wrenches (like the TradesPro 14 in. HD Pipe Wrench) for stubborn connections. A hand truck (like the Milwaukee 800 lbs. D-Handle Hand Truck) is crucial for safely moving heavy old and new units. For gas heaters, a gas leak detector or a soap solution for testing connections is also essential.

How much time should I realistically budget for a DIY water heater replacement, and is 'intermediate' difficulty accurate?

Budget at least a full day, and potentially two, as stated, especially if you encounter unexpected issues like corroded pipes or need to make trips for additional parts. The 'intermediate' difficulty is accurate because it combines plumbing, potential gas or electrical work, heavy lifting, and strict adherence to safety and code requirements, making it more complex than basic household repairs.

Transcript
Hide

Before you begin, wear work gloves to protect your hands. Switch the two house circuit breakers dedicated to the water heater off. Turn off the cold water supply to the water heater. Attach a garden hose to the drain valve and run the hose outside or to a location where the water can drain. Open a hot water faucet in the house or flip the relief valve open on the water heater. Open the drain valve and allow the tank to drain until empty. Remove the garden hose from the drain valve. Unthread the drain valve from the tank.

Auto-generated transcript. May contain errors.