Skip to main content

Verify Fitment and Headroom in Space — Check for Obstructions

Beginner2 hours

Part of project

How to Measure Stair Headroom · Step 4 of 5

Helpful?

In this video

The speaker moves to the location where the staircase will be built to check if the calculated total run (136 1/2 inches) fits. He also re-measures the headroom at the point where the head might hit the ceiling when descending the stairs. With a headroom of 7 feet (84 inches), it comfortably exceeds the local code's minimum of 76 3/4 inches. He stresses that while you can always have more headroom, you cannot have less than the code dictates. This step ensures the planned staircase dimensions are practical and compliant.

9.2K views429
Transcript
Hide

my distance from so my that means my stair set of stairs is going to run right from that surface up there to the end of the last Riser is going to be 1362 in okay so now we've got our total run of the stair case let's see if it works out down here so I swung you to the other end now so the where the top of the stairs is going to be as right over top the camera so we've got 136 in from that point back just behind the camera to the end of our step now that ends up coming out basically exactly uh so that um our last step is just past this wall okay so top of step is going to be down in this range right here and I know that because I know how many uh Rises I have which is two Rises so I can mark that on the wall measure down from my this is what my head room's going to be this is where I'm going to hit my head when I come down so right from there down to that Mark we've got basically 7 fet so 7 feet is 84 in uh in my area I've only got to be uh 67 and 3/4 or sorry 76 and 3/4 so we've got plenty of room like I said before 80 head room is nice it's better for moving furniture and stuff but check your local code to see exactly what minimum is for you you can always have more can't have less okay so it looks like that's all going to work out um so we've got all our information now to go and be able to start laying out the the Treads and cutting them I'm going to show you the

Auto-generated transcript. May contain errors.