Skip to main content

Final Sanding and Cleaning — Sand and Finish Handrail

Beginner6 hours

Part of project

How to Install a Handrail on Basement Stairs · Step 6 of 6

Helpful?

In this video

Begin by sanding the entire handrail surface with a random orbital sander, starting with 100-grit sandpaper and progressing to 220-grit. Pay close attention to the routed edges and the previously glued joint to ensure they are exceptionally smooth. For the rounded edges and any areas the orbital sander cannot reach, use 220-grit sandpaper and hand-sand until a 'buttery' smooth texture is achieved. After sanding, thoroughly wipe down the entire handrail with mineral spirits using lint-free cloths. This step removes all lingering sawdust, oils, and contaminants, creating an optimal surface for the finish to adhere.

444.0K views5.1K
Transcript
Hide

smoothing out the entire area now your joints never gonna look perfect with just a saab but all you have to do is take a rigid sanding block with a hundred grit sandpaper and sand off the remainder that way you can easily clean up that joint and it's time for gluing now the reason why we are doing a helvin joint is because a butt joint is not going to be strong enough for this type of application Elise in my opinion it's gonna have a lot of weight on a handrail and I don't want an issue with it

Auto-generated transcript. May contain errors.