Skip to main content

Secure Skirtboard — Attach the Skirt Board to the Stringer

Beginner8 hours

Part of project

How to Install Stair Skirt Boards on an Existing Staircase · Step 4 of 7

Helpful?

In this video

Once the bottom section is plumb, use a nail gun to begin securing the skirtboard. Start by nailing the bottom, then gradually work your way up the staircase. Continuously check the level of the treads and the plumb of the skirtboard with your torpedo level as you move upwards. You may need to slightly push or pull the skirtboard to achieve optimal alignment and tightness, ensuring the treads are level and the skirtboard is plumb. After nailing, fill any nail holes with wood filler.

111.2K views1.6K
Transcript
Hide

up with a gap right there if by happenstance you do happen to not have it perfectly plumb it's not the end of the world you can still install the new applause and then then use a stave shim and I've shown that before in other videos it you're just gonna make a shim basically with a bevel on it and fill that gap and trim it with your utility knife and that gap will disappear but it's not an ideal situation you want to continue to use your torpedo level here as we go along make sure the tread is level across as you're nailing it off and then also your skirt board the two should coincide if your skirt board is plumb your tread should be level and vice versa but you will find that as you move your way down you may have to kind of push and pull the skirt board around to get those treads nice and level and tight where they need to be and if you remember our

Auto-generated transcript. May contain errors.