Skip to main content

Secure Tread to Riser (Front) — Address Loose Treads

Beginner8 hours

Part of project

How to Fix a Bouncy or Wobbly Staircase · Step 2 of 8

Helpful?

In this video

To fix the tread to the top of the riser, you need to know where to screw. Measure the distance from the nose (front edge) of the tread to where the riser is seated in its rebate. For example, if the riser is 25 millimeters from the nose, set a combination square to 30 millimeters and draw a line along the tread. This line indicates the precise location above the riser. Make this mark on every tread you intend to fix. Use a 3-millimeter drill bit to create pilot holes directly on this line. Ensure you drill straight down to avoid coming out the side of the riser. Space about four screws evenly along the tread. Drive 50-millimeter screws (approximately double the thickness of the tread is a good guide) through the pilot holes. The screws should pull the tread and riser tightly together, eliminating any flex.

392.0K views10.2K