Skip to main content

Install Remaining Shiplap Courses — Continue Installing Subsequent Rows of Shiplap

Beginner3 mins

Part of project

How to Install Shiplap on a Stair Wall · Step 5 of 9

Helpful?

In this video

After the first course is securely installed and leveled, proceed with the remaining shiplap boards. Take the next cut board, ensure it is the correct length, and interlock its groove onto the tongue of the previously installed board. Apply gentle pressure to ensure a tight fit. Once seated, use the nail gun to fasten the board into the wall studs along the plumb lines, just as with the first course. For walls with consistent dimensions, many boards can be cut to the same length in advance, allowing for a more rapid installation process. Continue this method until you reach the top of the wall, ensuring each board is snug and securely fastened.

973 views32
Transcript
Hide

You could kind of nudge each side up to get it level and then start nailing With a wall like this all the cuts are pretty much the same length so I could really fly through most of this All right, we're in the home stretch. We have one more piece We need just to measure it and cut it and then we'll cock and then we will be done

Auto-generated transcript. May contain errors.