Skip to main content

Install and Level First Shiplap Course — Install First Row of Shiplap

Beginner3 mins

Part of project

How to Install Shiplap on a Stair Wall · Step 4 of 9

Helpful?

In this video

The installation of the first shiplap course is the most critical step, as any deviation from level will compound as you move up the wall. Position the first cut shiplap board onto the baseboard (or directly on the floor if the baseboard was removed). Place a level on top of the shiplap board and check its horizontal alignment. If it's not level, gently nudge either end up or down until the bubble in the level is perfectly centered. Once the board is perfectly level, use a nail gun to fasten it securely to the wall studs, driving nails through the face of the shiplap where it overlaps the studs (or concealed nailing through the tongue if using a specific type of shiplap designed for that). Ensure nails are driven firmly but not so deep as to mar the surface significantly.

973 views32
Transcript
Hide

Okay, now we're ready for our first course Which is the most important because we want to make sure it's level So that it will translate all the way up the wall in our case We are pretty dead on so we're okay Now if you were not You could kind of nudge each side up to get it level and then start nailing With a wall like this all the cuts are pretty much the same length so I could really fly through most of this

Auto-generated transcript. May contain errors.