Pour and Level Concrete — Pour and Finish Concrete Step
Part of project
How to Add a Step at a Too-High Back Door · Step 5 of 10
In this video
Carefully pour the mixed concrete into the formwork, distributing it evenly over the reinforcement wire and crushed rock base. Use a shovel or rake to spread the concrete as you go, ensuring it fills all corners and voids. Once the form is mostly full, use a straight edge, such as a flat 2x4, to screed the concrete. This involves moving the 2x4 across the top edges of the formwork in a sawing motion to level the concrete and remove any excess, creating a flat surface. Periodically check for low spots and add more concrete as needed, then screed again until the entire surface is level with the top of the formwork.
Pour and Level Concrete — Pour and Finish Concrete Step
Part of project
How to Add a Step at a Too-High Back Door · Step 5 of 10
In this video
Carefully pour the mixed concrete into the formwork, distributing it evenly over the reinforcement wire and crushed rock base. Use a shovel or rake to spread the concrete as you go, ensuring it fills all corners and voids. Once the form is mostly full, use a straight edge, such as a flat 2x4, to screed the concrete. This involves moving the 2x4 across the top edges of the formwork in a sawing motion to level the concrete and remove any excess, creating a flat surface. Periodically check for low spots and add more concrete as needed, then screed again until the entire surface is level with the top of the formwork.