Skip to main content

Finalize Installation and Wire Management — Secure and Conceal Wiring

Beginner6 hours

Part of project

How to Install Low-Voltage Deck Stair Lights · Step 8 of 8

Helpful?

In this video

After connecting the main landscape wire to the transformer, plug the transformer into the outdoor outlet. Activate the appropriate zone on the transformer (e.g., Zone 1) to power on the lights and verify that all installed path lights are working correctly. Once confirmed, begin tidying the wiring. Use staples to secure the main landscape wire along the underside of the deck or other structural elements, keeping it neat and out of sight. For sections running through garden beds or along paths, carefully bury the wire under mulch, gravel, or soil to conceal it. The presenter mentions that eventually, lattice will cover the exposed wire under the deck for a completely hidden look.

1.3K views57
Transcript
Hide

15v side cuz this is a longer run be careful of that rehang it all right so we got our wire hooked up I'm going to plug it in and we're going to test the lights out real quick we're hooked to Zone one so I'm going to turn Zone one on and let's go take a look so as you can see we got power all right now I'm going to clean up this wire in a bit so it looks a little neater all right so it's a few days later we got the wires all cleaned up as you can see I ran that wire right here all the way down and stapled it up and then I brought the wire down and to the ground so right now it's just under the mulch there which eventually there'll be a lattice here so the wire will be attached to that and you won't see the wire just dangling right here like it is right now so that

Auto-generated transcript. May contain errors.