Skip to main content

Test Lights and Make Adjustments — Test the Lighting System

Beginner6 hours

Part of project

How to Install Low-Voltage Deck Stair Lights · Step 7 of 8

Helpful?

In this video

Once all lights are connected, plug the transformer's power cord into a GFCI-protected outdoor outlet. Flip the main power switch on the transformer to the 'ON' position. Verify that all installed accent lights illuminate. If a light does not turn on, recheck its connection to the main cable and ensure the bulb is properly seated. During daylight, adjust the angle and position of each light to achieve the desired illumination effect. Final fine-tuning of the light angles should be done after dark for the best results.

1.2K views31