Skip to main content

Mark and Drill Wall for Anchors — Mark Mounting Points on Wall

Beginner3 hours

Part of project

How to Hang a Large Mirror on a Stair Landing · Step 3 of 7

Helpful?

In this video

Based on your desired mirror height, use the laser level to project a horizontal line on the wall that corresponds to the top of the mirror's hanging hardware. Mark the center point of where the mirror will hang. From this center, use the horizontal measurement from the mirror to mark the left and right screw locations. Verify the height using the vertical measurement from the mirror. Once marked, use a drill to create pilot holes for the wall anchors. Insert appropriate wall anchors into the drilled holes, tapping them flush with a hammer if necessary. Ensure the chosen anchors are suitable for the wall material (e.g., drywall, plaster) and can support the mirror's weight, especially in a humid environment where conventional fasteners might weaken over time.

13.9K views342
Transcript
Hide

So imagine on your your loop rings here, so we got 10 and 7 a's And then we got 25

Auto-generated transcript. May contain errors.