Skip to main content

Dry-Fit and Test Treads — Dry Fit New Treads

Intermediate4 mins

Part of project

How to Cover Waterfall-Style Stairs with Treads · Step 5 of 9

Helpful?

In this video

Before permanently installing the treads, dry-fit them into place. Gently slide each tread under the previously installed riser. Check that the tread fits snugly against the skirt board on both sides and that it is tight against the riser. A good fit means minimal gaps on the sides and a flush connection with the riser. If a tread is too tight, it may need slight sanding or trimming. If it's too loose, you might need to adjust or recut. After confirming a good dry fit, carefully remove the treads, ensuring not to damage the risers.

205.0K views3.0K