Skip to main content

Wire New Motion Sensor Switch — Connect Motion Sensor Switch - Line and Load

Beginner2 hours

Part of project

How to Install a Motion-Sensor Light Switch in a Stairway · Step 4 of 8

Helpful?

In this video

The video briefly shows the wiring diagram provided with the motion sensor wall switch, indicating connections for black (line/load), white (neutral), and green/bare (ground) wires. Following these instructions, connect the new motion sensor switch (e.g., a Lutron model is visible) to the existing electrical wires in the wall box. Typically, the two black wires from the wall are connected to the designated black wires on the switch, the white neutral wire from the wall is connected to the white neutral wire on the switch (if present), and the bare copper or green ground wire from the wall is connected to the green ground wire on the switch. Secure all connections using wire nuts, twisting them clockwise until tight to ensure no bare wire is exposed.

144.2K views1.4K